"Summer's winding down; cold winter days
are right around the corner."

  
     
 
“See for yourself the details of the most comprehensive
  
 
“Tune-up/Check-up” in the industry.
  
     
 
32 Point Gas Tune-up
  
40+ Point Heat Pump Tune-up
  Work Performed  
Work Performed
1.
 Start unit  
1.
 Check thermostat
2.
 Inspect flue and diverter  
2.
 Start unit
3.
 Clean interior of vestibule  
3.
 Check return air filter
4.
 Clean pilot assembly  
4.
 Routine cleaning of evaporator coil**
5.
 Adjust pilot  
5.
 Clean condensate drain**
6.
 Check thermocouple  
6.
 Check condensate pan and fittings for leaks
7.
 Clean burners  
7.
 Check blower wheel
8.
 Adjust burners  
8.
 Check blower motor stability
9.
 Set gas manifold gas pressure  
9.
 Check blower motor amp draw
10.
 Set burner air adjustment  
10.
 Lube motors & bearings
11.
 Check gas valve operation  
11.
 Check belt, pulleys and alignment
12.
 Test for gas leaks  
12.
 Check total electrical consumption
13.
 Check thermostat  
13.
 Examine parts for visible wear
14.
 Check heat anticipator  
14.
 Check and secure all panels
15.
 Check thermostat contacts  
15.
 Examine all electrical connections
16.
 Check safety devices  
16.
 Check unit disconnect switch
17.
 Check fan control  
17.
 Check temperature difference across coil
18.
 Check limit control  
18.
 Remove debris around outside unit
19.
 Inspect heat exchanger for leaks  
19.
 Routine cleaning of condenser coil
20.
 Inspect combustion chamber  
20.
 Check condenser fan motor stability
21.
 Check blower wheel  
21.
 Check condenser fan motor amp draw
22.
 Check blower motor and lube  
22.
 Check condenser fan blades for vibration
23.
 Check for belt tension and align  
23.
 Check reversing valve
24.
 Check and secure all panels  
24.
 Check crankcase heater
25.
 Check air filter  
25.
 Check relays & contactors
26.
 Check furnace wiring  
26.
 Check capacitors
27.
 Check noise and vibration levels  
27.
 Check all safety devices
28.
 Check for combustible materials around furnace  
28.
 Test time delay
29.
 Check for combustion air  
29.
 Check defrost assembly
30.
 Make final operation test  
30.
 Check all controls
31.
 Advise improvements if needed  
31.
 Test refrigeration metering device
32.

Check temperature difference of supply & return
air temperatures

  
32.
 Measure operating pressures with gauges
 
33.
 Check noise and vibration levels
   
34.
 Check compressor amp draw
   
35.
 Make final operations test
   
36.
 Wax outdoor unit**
   
37.
 Record system operations
   
38.
 Explanation of tune-up results
   
39.
 Advise improvements as needed
*** Water Source Only
  
40
 Conclude transaction
** If feasible and where accessible
  
41.
 Check reversing valve
     
42.
 Auxiliary heat strips
     
43.
 Check water temperatures***
   
44.
 Check water flow***
   
 
 
 
NOTICE: Limited Time Offer

Save$$$ Call Climatemakers (HOT-COLD) 468-2653
   
Save up to 40% off the regular price ($150.00) of the most
comprehensive “Tune-Up/Check-Up” in the industry.
   
Cathy Save $60  (40%)  Order by 09/13/10   You pay $150.00      $90
Save $45   (30%)  Order by 09/30/10   You pay $150.00    $105
Save $30    (20%)  Order by 10/31/10   You pay $150.00     $120
(additional discounts for multiple zones)
 
Order Directly From our Web Site and Save an
additional $5.00 Website Discount…

… click here to order!
 inspector
 
Save even more by Changing Fall Service to Planned Service
(Ask our Service Technician for details and if your system is eligible)
 
*Check our website www.climatemakers.com for details/benefi ts of our 30+ points gas and heat pump tune-ups. Actual scheduling of tune-ups can be at later date.
Cannot be combined with any other offer. Limited to homeowners only. Oil systems, builders & commercial buildings specifi cally excluded.